Web sling inspection

When a web sling goes through the inspection process, it is examined for several visible things. If the following things are found during the inspection, the sling will be removed from service:

1. If the sling rated capacity tag is missing or not readable.

2. Acid or alkalis burns.

3. Melting, charring or weld spatter of any part of the sling.

4. Holes, tears, cuts, snags or embedded particles.

5. Broken or worn stitching in load bearing splices.

6. Excessive abrasive wear.

7. Knots in any part of the sling.

8. Distortion, excessive pitting, corrosion or broken fittings.

9. Any conditions which cause doubt as to the strength of the sling.