G80 Clevis Sling Hook with Latch

Products > Riggings > G80 Clevis Sling Hook with Latch

G80 Clevis Sling Hook with Latch

For lifting application.
Size: 6 - 32mm
Working load: 1.12 - 31.5T
Material: Alloy steel
Technology: forged, tempered & quenched
Suitable for EN818-2 G80 chain.
Individually proof test at 2.5 times working load limit.
Fatigue test at 1.5 times working load limit for 20000 cycles.
Strictly sample breaking test for each batch.
Surface: Powder painted
Packaging: cartons+ pallets

Size: 6 - 32mm

Working load: 1.12 - 31.5T

Material: Alloy steel

Technology: forged, tempered & quenched

Suitable for EN818-2 G80 chain.

Individually proof test at 2.5 times working load limit.

Fatigue test at 1.5 times working load limit for 20000 cycles. 

Strictly sample breaking test for each batch.

Surface: Powder painted

Packaging: cartons+ pallets

Introductions for Use

Hooks should be inspected before use to ensure that:

all markings are legible;

hooks are free from nicks, gouges and cracks;

the latch is present;

the latch is functional;

a hook with the correct Working Load Limit has been selected with respect to the sling design i.e. the load to be lifted, the number of legs in the sling, the top angle etc. 

For further details we refer to EN 818, norm for Chain Slings;

the hook is never side-, tip- or back-loaded;

always make sure that the hook is supporting the load correctly, the latch should not be supporting the load;

hooks may not be heat treated as this may affect their Working Load Limit;

never modify, repair or reshape a hook by machining, welding, heating or bending as this may affect the Working Load Limit;

do not swivel a swivel hook when it is supporting a load.

 

It is required that the products are regularly inspected and that the inspection should take place in accordance with the safety standards given in the country of use. This is required because the products in use may be affected by wear, misuse, overloading etc. with a consequence of deformation and alteration of the material structure.

Inspection should take place at least every six months and even more frequently when the hooks are used in severe operating conditions.

 


Related Products:

G80 Clevis Sling Hook with Latch  G80 Eye Sling Hook with Latch   322A/C U.S Type swivel hook  320C U.S Type Eye Hook  320A U.S Type Eye Hook  G80 Clevis Self-locking Hook with Safety Latch  
G80 Eye Self-locking Hook with Safety Latch  Steel Tube Hook  G80 Eye Sorting Hook  A-331 U.S.Type Clevis Slip Hook  G80 Eye Foundry Hook  A-332 U.S. Type Eye Grab Hook  A-330 U.S. Type Clevis Grab Hook  G80 Eye Shortening Grab Hook  G80 Clevis Shortening Grab Hook  G80 Swivel Self-locking Hook with Safety Latch

Name
Phone
Email
Corporate name
Address
Leaving Message*
 
Verification code
Submit